Production scientifique

Découvrez toutes les productions scientifiques du laboratoire : publications, chapitres d’ouvrage, conférences avec actes…

PublicationsChapitres d'ouvrageConférences avec actes

Publications

2021

Alavi, S. E., M. Nasimsobhan, J. F. Ganghoffer, A. Sinoimeri and M. Sadighi (2021). “Chiral Cosserat model for architected materials constructed by homogenization.” Meccanica 56(10): 2547-2574.
Ben Fraj, A., B. Jaouachi and D. Adolphe (2021). “Effect of Stone Washing Parameters on Denim Behavior Bagging.” Journal of Natural Fibers: 1-17.
Brillard, A., D. Kehrli, O. Douguet, K. Gautier, V. Tschamber, M.-A. Bueno and J.-F. Brilhac (2021). “Pyrolysis and combustion of community masks: Thermogravimetric analyses, characterizations, gaseous emissions, and kinetic modeling.” Fuel 306: 121644.
Camillieri, B. and M.-A. Bueno (2021). “Influence of Finger Movement Direction and fingerprints Orientation on Friction and Induced Vibrations with Textile Fabrics.” Tribology Letters 69(4): 143.
Chen, C., P. Wang and X. Legrand (2021). “Effect of Core Architecture on Charpy Impact and Compression Properties of Tufted Sandwich Structural Composites.” Polymers 13.
Ebraheem, Y., E. Drean and D. C. Adolphe (2021). “Universal gripper for fabrics – design, validation and integration.” International Journal of Clothing Science and Technology 33(4): 643-663.
Elamri, A., M. Hamdaoui and O. Harzallah (2021). “Preparation and Characterization of Recycled PP/Organo-Clay Filter for Dyeing Ability.” Fibers and Polymers 22: 1-8.
Girault, E., F. Biguenet, A. Eidenschenk, D. Dupuis, R. Barbet and F. Heim (2021). “Fibrous biomaterials: Effect of textile topography on foreign body reaction.” Journal of biomedical materials research. Part B, Applied biomaterials.
Gnaba, I., D. Soulat, X. Legrand and P. Wang (2021). “Investigation of the formability behaviour during stamping of tufted and un-tufted carbon preforms: towards localized reinforcement technologies.” International Journal of Material Forming 14.
Hermann, A., S. Giljean, M.-J. Pac, C. Marsiquet, M. Beaufils-Marquet, D. Burr and V. Landry (2021). “Understanding indentation, scratch and wear behavior of UV-cured wood finishing products.” Progress in Organic Coatings 161: 106504.
Huang, J., P. Boisse, N. Hamila, I. Gnaba, D. Soulat and P. Wang (2021). “Experimental and numerical analysis of textile composite draping on a square box. Influence of the weave pattern.” Composite Structures 267: 113844.
Imran, A., E. Drean, L. Schacher and D. Adolphe (2021). “Development of Ergonomically Designed Functional Bra for Women with Hemiplegia.” Autex Research Journal 21(3): 252-261.
Joshi, A., A. Psikuta, M.-A. Bueno, S. Annaheim and R. M. Rossi (2021). “Effect of movement on convection and ventilation in a skin-clothing-environment system.” International Journal of Thermal Sciences 166: 106965.
Landolsi, I., N. Rjiba, M. Hamdaoui, O. A. Harzallah and C. Boudokhane (2021). “Homogeneous microwave-assisted carboxymethylation from totally chlorine free bleached olive tree pruning residues pulp: Scientific paper.” Journal of the Serbian Chemical Society.
Landolsi, I., N. Rjiba, M. Hamdaoui, O. A. Harzallah and C. Boudokhane (2021). “Optimization of Cellulose Extraction and TCF Bleaching from Olive Tree Pruning Residues by Box–Behnken Design.” Journal of Natural Fibers: 1-13.
Li, M., P. Wang, F. Boussu and D. Soulat (2021). “Investigation of impact performance of 3-dimensional interlock polymer fabrics in double and multi-angle pass stabbing.” Materials & Design 206: 109775.
Li, M., P. Wang, F. Boussu and D. Soulat (2021). “Investigation of the Strength Loss of HMWPE Yarns During Manufacturing Process of 3D Warp Interlock Fabrics.” Applied Composite Materials.
Mbotto Tonye, D. and K. Buet Gautier (2021). “Influence of the reinforcement on prepreg tack.” Polymer Composites 42(9): 4795-4803.
Meddahi-Pelle, A., G. Pavon-Djavid, N. Chakfe and F. Heim (2021). “How yarn orientation limits fibrotic tissue ingrowth in a woven polyester heart valve scaffold: a case report.” Biomedical Engineering-Biomedizinische Technik 66(2): 225-230.
Saidane, E. H., G. Arnold, P. Louis and M.-J. Pac (2021). “3D printed continuous glass fibre-reinforced polyamide composites: Fabrication and mechanical characterisation.” Journal of Reinforced Plastics and Composites: 073168442110517.
Saidane, E. H., D. Scida and R. Ayad (2021). “Thermo-mechanical behaviour of flax/green epoxy composites: Evaluation of thermal expansion coefficients and application to internal stress calculation.” Industrial Crops and Products 170: 113786.
Shen, H., P. Wang and X. Legrand (2021). “In-plane shear characteristics during the forming of tufted carbon woven fabrics.” Composites Part A: Applied Science and Manufacturing 141: 106196.
Sikame Tagne, N. R., D. Abessolo, O. Harzallah, D. Ndapeu, W. Huisken, D. Nkemaja, A. Biwole, T. E. Mbou, E. Njeugna, M. Fogue, J. Y. Drean and S. Bistac (2021). “Physico-chemical and mechanical characterization of bambusa vulgaris fibers from Cameroon.” Journal of Composite Materials 55(18): 2489-2502.
Walther, J., C. Bessette, M. Decrette, M. Tourlonias, M.-A. Bueno, J.-F. Osselin, F. Charleux and D. Coupé (2021). “Yarn Damage Conditions Due to Interactions During Interlock Weaving Process: In-situ and In-lab Experiments.” Applied Composite Materials.
Zakariya Zubair, M. A., Gildas L’Hostis, Muhammad Zubair and Jean-Yves Drean (2021). “Development of Multilayer Woven Fabrics for the Adoptive Geometry Composite Structure.” FIBRES & TEXTILES in Eastern Europe issue No.4/2021: 56-61.
Zubair, Z., G. Lhostis and I. Goda (2021). “Electrical activation and shape recovery control of 3D multilayer woven
shape memory polymer composite incorporating carbon fibers.” Materials Letters 291: 129511.

2020

Basit, A., G. Lhostis and B. Durand (2020). “Investigation of the shape memory and actuation properties of different asymmetric smart polymer composites.” Advanced Composite Materials: 1-16.
Bodaghi, M., I. Gnaba, X. Legrand, D. Soulat, P. Wang, M. Deléglise-Lagardère and C. H. Park (2020). “In-plane permeability changes of plain weave glass fabric induced by tufting.” Advanced Composite Materials: 1-17.
Chakfé, N., P. Billaud, A. Lejay and F. Heim (2020). “Valves and pipes in the cardiovascular system. Where are we going.” J Cardiovasc Surg (Torino) 61(5): 525-527.
Gachet, B., M. Lecompère, C. Croutxé-Barghorn, D. Burr, G. L’Hostis and X. Allonas (2020). “Highly reactive photothermal initiating system based on sulfonium salts for the photoinduced thermal frontal cationic polymerization of epoxides: a way to create carbon-fiber reinforced polymers.” RSC Advances 10(68): 41915-41920.
Gargoubi, S., A. Baffoun, O. A. Harzallah, M. Hamdi and C. Boudokhane (2020). “Water repellent treatment for cotton fabrics with long-chain fluoropolymer and its short-chain eco-friendly alternative.” The Journal of The Textile Institute 111(6): 835-845.
Goda, I., Z. Zubair, G. L’Hostis and J.-Y. Drean (2020). “Design and characterization of 3D multilayer woven reinforcements shape memory polymer composites.” Journal of Composite Materials 55(5): 653-673.
Grandhomme, J., N. Chakfe, A. Chaudhuri, T. R. Wyss, R. Chiesa, J. Chakfe, D. Dion, F. Heim and A. Lejay (2020). “The Impact of EndoAnchor Penetration on Endograft Structure: First Report of Explant Analysis.” EJVES Vascular Forum 49: 4-10.
Heim, F. (2020). “Heart valves from polymeric fibers: potential and limits.” J Cardiovasc Surg (Torino) 61(5): 586-595.
Jayet, J., F. Heim, J. Canonge, N. Chakfé, M. Coggia and R. Coscas (2020). “Mechanical study of reinforced fenestrations available on the market.” Annals of Vascular Surgery 68: 108-109.
Keith, A. N., C. Clair, A. Lallam, E. A. Bersenev, D. A. Ivanov, Y. Tian, A. V. Dobrynin and S. S. Sheiko (2020). “Independently Tuning Elastomer Softness and Firmness by Incorporating Side Chain Mixtures into Bottlebrush Network Strands.” Macromolecules 53(21): 9306-9312.
Keith, A. N., M. Vatankhah-Varnosfaderani, C. Clair, F. Fahimipour, E. Dashtimoghadam, A. Lallam, M. Sztucki, D. A. Ivanov, H. Liang, A. V. Dobrynin and S. S. Sheiko (2020). “Bottlebrush Bridge between Soft Gels and Firm Tissues.” ACS Central Science.
Khoffi, F., Y. Khalsi, J. Chevrier, H. Kerdjoudj, A. Tazibt and F. Heim (2020). “Surface modification of polymer textile biomaterials by N2 supercritical jet: Preliminary mechanical and biological performance assessment.” Journal of the Mechanical Behavior of Biomedical Materials 107: 103772.
Lejay, A., V. Vento, S. Kuntz, L. Steinmetz, Y. Georg, F. Thaveau, F. Heim and N. Chakfé (2020). “Current status on vascular substitutes.” J Cardiovasc Surg (Torino) 61(5): 538-543.
Li, M., P. Wang, F. Boussu and D. Soulat (2020).”Dynamic stab resistance of multi-ply three-dimensional warp interlock fabrics with high-performance high-molecular-weight polyethylene yarns for protective applications.” Journal of Industrial Textiles 0(0): 1528083720965685.
Li, M., P. Wang, F. Boussu and D. Soulat (2020).”A review on the mechanical performance of three-dimensional warp interlock woven fabrics as reinforcement in composites.” Journal of Industrial Textiles 0(0): 1528083719894389.
Li, M., P. Wang, F. Boussu and D. Soulat (2020). “Effect of Fabric Architecture on Tensile Behaviour of the High-Molecular-Weight Polyethylene 3-Dimensional Interlock Composite Reinforcements.” Polymers 12(5): 1045.
Litvinov, V., R. Deblieck, C. Clair, W. Van den fonteyne, A. Lallam, R. Kleppinger, D. A. Ivanov, M. E. Ries and M. Boerakker (2020). “Molecular Structure, Phase Composition, Melting Behavior, and Chain Entanglements in the Amorphous Phase of High-Density Polyethylenes.” Macromolecules 53(13): 5418-5433.
Lucereau, B., F. Koffhi, A. Lejay, Y. Georg, B. Durand, F. Thaveau, F. Heim and N. Chakfe (2020). “Compliance of Textile Vascular Prostheses Is a Fleeting Reality.” European Journal of Vascular and Endovascular Surgery 60(5): 773-779.
Shen, H., Y. Yang, P. Wang, Y. Hong, X. Legrand, X. Yang and J. Wu (2020). “Effect of tufting technique on sound insulation of multi-layer glass woven fabrics.” Materials Research Express 7: 095510.
Sikame Tagne, N. R., T. E. Mbou, O. Harzallah, D. Ndapeu, W. Huisken, D. Nkemaja, E. Njeugna, M. Fogue and J. Y. Drean (2020). “Physicochemical and Mechanical Characterization of <i>Raffia vinifera</i> Pith.” Advances in Materials Science and Engineering 2020: 8895913.
Vento, V., A. Lejay, S. Kuntz, S. Ancetti, F. Heim, N. Chakfé and M. Gargiulo (2020). “Current status on aortic endografts.” J Cardiovasc Surg (Torino) 61(5): 544-554.
Wang, J., P. Wang, N. Hamila and P. Boisse (2020). “Mesoscopic analyses of the draping of 3D woven composite reinforcements based on macroscopic simulations.” Composite Structures 250: 112602.
Xiao, S., P. Wang, D. Soulat and H. Gao (2020). “An exploration of the deformability behaviours dominated by braiding angle during the forming of the triaxial carbon fibre braids.” Composites Part A: Applied Science and Manufacturing 133: 105890.
Zdiri, K., A. Elamri, M. Hamdaoui, O. Harzallah, N. Khenoussi and J. Brendlé (2020). “Valorization of Post-consumer PP by (Un)modified Tunisian Clay Nanoparticles Incorporation.” Waste and Biomass Valorization 11: 2285-2296.
Zdiri, K., A. Elamri, O. Harzallah, M. Hamdaoui and J. Brendlé (2020). “Properties of recycled PP/clay filaments used for simulation of wastewater treatment filter.” The Journal of The Textile Institute: 1-10.
Zhai, W., P. Wang, X. Legrand, D. Soulat and M. Ferreira (2020). “Effects of Micro-Braiding and Co-Wrapping Techniques on Characteristics of Flax/Polypropylene-Based Hybrid Yarn: A Comparative Study.” Polymers 12(11): 2559.

2019

Basit, A., G. L’Hostis and B. Durand (2019). “The recovery properties under load of a shape memory polymer composite material.” Materialwissenschaft und Werkstofftechnik 50(12): 1555-1559.
Bessette, C., M. Decrette, M. Tourlonias, J.-F. Osselin, F. Charleux, D. Coupé and M.-A. Bueno (2019). “In-situ measurement of tension and contact forces for weaving process monitoring: Application to 3D interlock.” Composites Part A: Applied Science and Manufacturing 126: 105604.
Brahem, M., W. Messaoudi, F. Khedher, B. Jaouachi and D. Adolphe (2019). “A study of the consumption of sewing threads for women’s underwear : bras and panties.” AUTEX Research Journal Ahead of Print.
Chassagne, F., E. Benoist, P. Badel, R. CONVERT, L. Schacher and J. Molimard (2019). “Characterization of fabric-to-fabric friction : application to medical compression bandages.” AUTEX Research Journal.
Cheng, V., V. Kuzmichev and D. Adolphe (2019). “A digital replica of male compression underwear.” Textile Research Journal.
Decrette, M., J.-F. Osselin and J.-Y. Drean (2019). “Motorized Jacquard technology for multilayer weaving damages study and reduction: Shed profile and close shed profile.” Journal of Engineered Fibers and Fabrics 14: 1558925019833025.
Djilani, C., R. Zaghdoudi, P. Magri, D. Faycal, A. Lallam and B. Bouchekima (2019). “Elaboration and characterization of chitosan/banana peel biocomposite for the removal of dyes from wastewater.” Desalination and Water Treatment 151: 189-198.
El Mouatassim, A., M.-J. PAC, F. Pailloux, G. Amiard, P. Henry, C. Rousselot, D. Eyidi, M.-H. Tuilier and T. Cabioc’h (2019). “On the possibility of synthesizing multilayered coatings in the (Ti,Al)N system by RGPP: A microstructural study.” Surface and Coatings Technology 374: 845-851.
Gargoubia, S., A. Baffoun, O. Harzallah, M. Hamdi and C. Boudokhane (2019). “Water repellent treatment for cotton fabrics with long-chain fluoropolymer and its short-chain eco-friendly alternative.” The journal of Textile Institute.
Goda, I., G. L’Hostis and P. Guerlain (2019). “In-situ non-contact 3D optical deformation measurement of large capacity composite tank based on close-range photogrammetry.” Optics and Lasers in Engineering 119: 37-55.
Guignier, C. and M.-A. BUENO (2019). “Influence of wear of carbon nanotube grown on carbon surfaces on the mechanical and electrical properties of composites materials.” Journal of Industrial Textiles 48(10): 1580-1592.
Guignier, C., B. Camillieri, M. Schmid, R. Rossi and M.-A. Bueno (2019). “E-knitted textile with polymer optical fibers for friction and pressure monitoring in socks.” Sensors 19(13).
Hatoum, H., E. Girault, F. Heim and L. P. Dasi (2020). “In-vitro characterization of self-expandable textile transcatheter aortic valves.” Journal of the Mechanical Behavior of Biomedical Materials 103: 103559.
Iftikhar, F., T. Hussain, Z. Ali, A. Nazir and D. Adolphe (2019). “Influence of yarn count and cover factor on mechanical, comfort aesthetic and hand properties of ladies’ summer apparel fabrics.” Journal of Natural Fibers.
Iftikhar, F., T. Hussain, Z. Ali, A. Nazir, D. Adolphe and L. Schacher (2019). “Investigation og thermo-physiological comfort and mechanical properties of fine cotton fabrics for ladies summer apparel.” Journal of Natural Fibers.
Ivanov, D., C. Clair, A. Lallam, M. Rosenthal, M. Sztucki, M. Vatankhah-varnoosfaderani, A. N. Keith, Y. Cong, H. Liang, A. Dobrynin and S. Sheiko (2019). “Strained Bottlebrushes in Super-Soft Physical Networks.” ACS Macro Letters.
Jaouachi, B., F. Khedher and D. Adolphe (2019). “Compared basic stitch’s consumptions using image analysis, geometrical modelling and statistical techniques.” The journal of Textile Institute 110(9): 1280-1292.
Jayet, J., R. Coscas, F. Heim, N. Chakfe and M. Coggia (2019). “Experimental In Situ Laser Fenestration Creates Immediate Substantial Textile Damages.” European Journal of Vascular and Endovascular Surgery 58(6, Supplement 1): e81-e82.
Jaziri, H., S. Mokhtar, N. Chakfe, F. Heim and S. B. Abdessalem (2019). “Elastic recovery of polymeric braided stents under cyclic loading: Preliminary assessment.” Journal of the Mechanical Behavior of Biomedical Materials 98: 131-136.
Joshi, A., A. Psikuta, M.-A. Bueno, S. Annaheim and R. M. Rossi (2019). “Analytical clothing model for sensible heat transfer considering spatial heterogeneity.” International Journal of Thermal Sciences 145: 105949.
Leclinche, F., D. Adolphe, E. Drean, L. Schacher and V. Zimpfer (2019). “Modeling of wear sound production based on mechanical and friction properties of woven fabric.” Textile Research Journal: 1-11.
Lucereau, B., A. Bellissard, F. Beck, D. Dion, F. Heim, N. Chakfe and A. Lejay (2019). “Non-Anastomotic Complete ePTFE Axillobifemoral Bypass Disruption and Thrombosis Following Shoulder Dislocation.” EJVES Short Reports 44: 15-18.
Malek, S., B. Jaouachi, F. Khedher and D. Adolphe (2019). “Sewing thread consumption for chain stitches of class 400 using geometrical and multilinear regression models.” AUTEX Research Journal Ahead of Print.
Malek, S., B. Jaouachi, F. Khedher and D. Adolphe (2019). “Sewing thread consumption for different lockstitches of the class 300 using geometrical and multi-linear regression models.” AUTEX Research Journal Ahead of Print.
Mejouyo, P. W. H., O. Harzallah, N. R. S. Tagne, D. Ndapeu, G. Tchemou, J. Y. Drean and E. Njeugna (2019). “Physical and Mechanical Characterization of Several Varieties of Oil Palm Mesocarp Fibers Using Different Cross-Sectional Assumptions.” Journal of Natural Fibers: 1-17.
Melki, S., F. Biguenet and D. Dupuis (2019). “Hydrophobic properties of textile materials: robustness of hydrophobicity.” The Journal of The Textile Institute: 1-8.
Peyre, K., M. Tourlonias, M.-A. BUENO, F. Spano and R. ROSSI (2019). “Tactile perception of textile surfaces from an artificial finger instrumented by a polymeric optical fibre.” Tribology International 130: 155-169.
Pierrel, J., A. Ibrahim, C. Croutxé-Barghorn, G. L’Hostis and X. Allonas (2019). “Full control of polymer properties during the two-stage on-demand free-radical photopolymerization of fiber-reinforced polymers.” Journal of Polymer Science Part A: Polymer Chemistry 57(13): 1440-1447.
Rahem, Z., I. Mayouf, M. Guessoum, C. Delaite, A. Douibi and A. Lallam (2019). “Compatibilization of biocomposites based on sponge-gourd natural fiber reinforced poly(lactic acid).” Polymer Composites 0(0).
Rahema, Z., A. Douibia, A. Lallamb, C. Delaitec and M. Guessoumd (2019). “Synergistic Combination of Crystallization and Addition of a Toughening Agent to Promote Recycled Poly(Ethylene Terephthalate) Performances ” Polymer Blends 61(5): 1–15.
Saidane, E. H., D. Scida, M.-J. Pac and R. Ayad (2019). “Mode-I interlaminar fracture toughness of flax, glass and hybrid flax-glass fibre woven composites: Failure mechanism evaluation using acoustic emission analysis.” Polymer Testing.
Tourlonias, M., M.-A. Bueno, G. Fassi, I. Aktas and Y. Wielhorski (2019). “Influence of friction angle between carbon single fibres and tows: Experimental analysis and analytical model.” Composites Part A: Applied Science and Manufacturing 124: 105478.
Zdiri, K., O. Harzallah, A. Elamri, N. Khenoussi, J. Brendlé and H. Mohamed (2019). “Rheological and thermal behavior of Tunisian clay reinforced recycled polypropylene composites.” Advances in Polymer Technology 0(0).

2018

Afzal A., Harzallah O., Drean J.-Y., Akhtar N.-A. et Ahmad S., “Performance characterization of multifunctional different cross-sectional-shaped coaxial composite filaments for SMART textile applications” – Journal of Industrial Textiles, p.1-22, 2018.
Amri A., Laroche G., Chakfe N. et Heim F., “Fibrous composite material for textile heart valve design: in vitro assessment” – Biomedical Engineering/Biomedizinische Technik, vol.63, n°3, p.221-230, 2018.
Bernard C., Bahlouli N., Wagner-Kocher C., Lin J., Ahzi S. et Rémond Y., “Multiscale description and prediction of the thermomechanical behavior of multilayered plasticized PVC under a wide range of strain rate” – Journal of Materials Science, p.1-16, 2018.
Camillieri B., Bueno M.-A., Fabre M., Juan B., Lemaire-Semail B. et Mouchnino L., “From finger friction and induced vibrations to brain activation: Tactile comparison between real and virtual textile fabrics” – Tribology International, vol.126, p.283-296, 2018.
Chenesseau B., Heim F., Pidancier C., Lejay A., Thaveau F., Georg Y. et Chakfe N., “How compression inside a delivery system can degrade the cover of aortic endografts” – Annals of Vascular Surgery, 2018.
Decrette M., Osselin J.-F. et Drean J.-Y., “Motorized Jacquard technology for multilayer weaving damages study and reduction: shed profile and close shed profile” – Journal of engineered Fibers and Fabrics, 2018.
Gassara H.-E., Barbier G., Wagner-Kocher C., Sinoimeri A. et Pumo B., “Experimental evaluation of transverse friction between fibers” – Tribology International, vol.119, p.112-122, 2018.
Girard C., Gupta M., Lallam A., Anokhin D., Bovsunovskaya P., Akhyamova A., Melnikov A., Piryazev A., Rodygin A., Rychkov A., Grafskaya K., Shabratova E., Zhu X., Möller M. et Ivanov D., “Synthesis and characterization of poly (ester amide amide) s of different alkylene chain lengths” – Polymer Bulletin, p.1-15, 2018.
Guignier C. et Bueno M.-A., “Influence of wear of carbon nanotube grown on carbon surfaces on the mechanical and electrical properties of composite materials” – Journal of Industrial Textiles, p.1-13, 2018.
Guignier C., Bueno M.-A., Camillieri B. et Durand B., “Influence of composite processing on the properties of CNT grown on carbon surfaces” – Applied Surface Science, vol.428, p.835-843, 2018.
Hamdaoui M., Romdhani Z., Djebbi I., Harzallah O. et Harzallah J., “Chemical auxiliaries free dyeing of cationized cotton with 1:2 metal complex dye” – Indian Journal of Fibre & Textile Research, vol.43, n°3, p.357-362, 2018.
Hatoum H., Heim F. et Dasi L.-P., “Stented valve dynamic behavior induced by polyester fiber leaflet material in transcatheter aortic valve devices” – Journal of the mechanical behavior of biomedical materials, vol.86, p.232-239, 2018.
Jayet J., Coscas R., Heim F., Brissoniere O.-G., Javerliat I., Chakfe N. et Coggia M., “Laser Uses In Non-Coronary Arterial Disease” – Annals of vascular surgery, 2018.
Jayet J., Heim F., Coggia M., Chakfe N. et Coscas R., “An Experimental Study of Laser in situ Fenestration of Current Aortic Endografts” – European Journal of Vascular and Endovascular Surgery, vol.56, n°1, p.68-77, 2018.
Jmal H., Bahlouli N., Wagner-Kocher C., Leray D., Ruch F., Munsch J.-N. et Nardin M., “Influence of the grade on the variability of the mechanical properties of polypropylene waste” – Waste Management, vol.75, p.160-173, 2018.
Khalsi Y., Heim F., Lee J. et Tazibt A., “Influence of the process parameters on the surface topography” – Polymer Engineering and Science, 2018.
Khalsi Y., Heim F., Lee J. et Tazibt A., “N2 Supercritical jet to modify the characteristics of polymer material surfaces: Influence of the process parameters on the surface topography” – Polymer Engineering and Science, 2018.
Leclinche F., Adolphe D., Drean E., Schacher L. et Zimpfer V., “Modeling of wear sound production based on mechanical and friction properties of woven fabric” – Textile Research Journal, p.1-11, 2018.
Lejay A., Colvard B., Magnus L., Dion D., Georg Y., Papillon J., Thaveau F., Geny B., Swanström L., Heim F. et Chakfé N., “Explanted Vascular and Endovascular Graft Analysis: Where Do We Stand and What Should We Do?” – European Journal of Vascular and Endovascular Surgery, p.1-10, 2018.
Mert E., Psikuta A., Arévalo M., Charbonnier C., Luible-Bär C., Bueno M.-A. et Rossi R., “A validation methodology and application of 3D garment simulation software to determine the distribution of air layers in garments during walking” – Measurement, vol.117, p.153-164, 2018.
Pinot Y., Tuilier M.-H., Pac M.-J., Rousselot C., Thiaudière D. et Ulhaq-Bouillet C., “Influence of film thickness on the structural transition cubic/hexagonal within Ti0. 38Al0. 62N films” – Thin Solid Films, vol.649, p.160-166, 2018.
Shah Hosseini N., Simon B., Messaoud T., Khenoussi N., Schacher L. et Adolphe D., “Quantitative approaches of nanofibers organization for biomedical patterned nanofibrous scaffold by image analysis” – Journal of Biomedical Materials Research Part A, vol.9999, p.1-10, 2018.
Sikame Tagne N.-R., Ndapeu D., Nkemaja D., Tchemou G., Fokwa D., Huisken W., Njeugna E., Fogue M., Drean J.-Y. et Harzallah O., “Study of the viscoelastic behaviour of the Raffia vinifera fibres” – Industrial Crops & Products, vol.124, p.572-581, 2018.
Tourlonias M., Bueno M.-A., Jordan C. et Poquillon D., “Influence of Wear on the Sizing Layer and Desizing of Single Carbon Fibre-to-Fibre Friction” – Wear, vol.402-403, p.64-70, 2018.
Vaesken A., Pelle A., Pavon-Djavid G., Rancic J., Chakfe N. et Heim F., “Heart valves from polyester fibers: a preliminary 6-month in vivo study” – Biomedical Engineering/Biomedizinische Technik, vol.63, n°3, p.271-278, 2018.
Vatankhah-Varnosfaderani M., Keith A., Cong Y., Liang H., Rosenthal M., Sztucki M., Clair C., Magonov S., Ivanov D., Dobrynin A. et Sheiko S., “Chameleon-like elastomers with molecularly encoded strain-adaptive stiffening and coloration” – Science, vol.359, n°6383, p.1509-1513, 2018.
Zdiri K., Elamri A., Hamdaoui M., Harzallah O., Khenoussi N. et Brendlé J., “Elaboration and Characterization of Recycled PP/Clay Nanocomposites” – Journal of Materials and Environmental Sciences, vol.9, n°8, p.2370-2378, 2018.
Zdiri K., Elamri A., Hamdaoui M., Harzallah O., Khenoussi N. et Brendlé J., “Reinforcement of recycled PP polymers by nanoparticles incorporation” – Green Chemistry Letters and Reviews, vol.11, n°3, p.296-311, 2018.
Zdiri K., Elamri A., Hamdaoui M., Harzallah O., Khenoussi N. et Brendlé J., “Valorization of Post-consumer PP by (Un) modified Tunisian Clay Nanoparticles Incorporation” – Waste and Biomass Valorization, p.1-12, 2018.
Zdiri K., Elamri A., Hamdaoui M., Khenoussi N., Harzallah O. et Brendle J., “Impact of Tunisian clay nanofillers on structure and properties of post-consumer polypropylene-based nanocomposites” – Journal of Thermoplastic Composite Materials, 2018.

2017

Afzal A., Drean J.-Y., Harzallah O., Khenoussi N., Ahmad S. et Akhtar N.-A., “Development of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications” – Textile Research Journal, vol.87, n°16, p.1991-2004, 2017.
Camillieri B. et Bueno M.-A., “Artificial finger design for investigating the tactile friction of textile surfaces” – Tribology International, vol.109, p.274-284, 2017.
Ebraheem Y., Drean E. et Adolphe D., “A new universal automatic manipulation system for fabrics” – International Journal of Clothing Science and Technology 2017.
Georg Y., Bussmann A., Mathieu D., Heim F., Durand B. et Chakfe N., “Clinical Applications of the Study of the Radial Force of Thoracic Stentgrafts” – Annals of Vascular Surgery, vol.38, p.e16, 2017.
Mert E., Psikuta A., Bueno M.-A. et Rossi R., “The Effect of Body Postures on the Distribution of Air Gap Thickness and Contact Area” – International journal of biometeorology, vol.61, n°2, p.363-375, 2017.
Pac M.-J., Pinot Y., Giljean S., Rousselot C., Delobelle P., Ulhaq-Bouillet C. et Tuilier M.-H., “Investigation of Ti 0.54 Al 0.46/Ti 0.54 Al 0.46 N multilayer films deposited by reactive gas pulsing process by nano-indentation and electron energy-loss spectroscopy” – Thin Solid Films, vol.634, p.96-106, 2017.
Serroukh S., Huber P. et Lallam A., “Adsorption behavior of optical brightening agent on microfibrillated cellulose studied through inverse liquid chromatography: the need to correct for axial dispersion effect” – Journal of Chromatography A, 2017.
Shah Hosseini N., Bölgen N., Khenoussi N., Yılmaz Ş.-N., Yetkin D., Hekmati A.-H., Schacher L. et Adolphe D., “Novel 3D Electrospun Polyamide Scaffolds Prepared by 3D Printed Collectors and their Interaction with Chondrocytes” – International Journal of Polymeric Materials and Polymeric Biomaterials, p.1-8, 2017.
Sikame Tagne, N.-R., Ebénézer N., Dieunedort N., Didier F., Fogue M., Drean J.-Y. et Harzallah O., “Investigation of the Physical and Mechanical Properties of Raffia Vinifera Fibers along the Stem” – Journal of Natural Fibers, vol.14, n°5, p.621-633, 2017.
Talmoudi H., Khenoussi N., Adolphe D., Haj Said A. et Schacher L., “An In Situ Crystal Growth Of Metal Organic Frameworks-5 On Electrospun PVA Nanofibers” – AUTEX Research Journal, 2017.
Tourlonias M., Bueno M.-A. et Poquillon D., “Friction of Carbon Tows and Fine Single Fibres” – Composites Part A: Applied Science and Manufacturing, vol.98, p.116-123, 2017.
Vafaee M., Olya M.-E., Drean J.-Y. et Hekmati A.-H., “Synthesize, characterization and application of ZnO/W/Ag as a new nanophotocatalyst for dye removal of textile wastewater; kinetic and economic studies” – Journal of the Taiwan Institute of Chemical Engineers, p.1-12, 2017.
Yosouf K., Latroch H., Schacher L., Adolphe D., Drean E. et Zimpfer V., “Frictional Sound Analysis by Simulating the Human Arm Movement” – AUTEX Research Journal, vol.17, n°1, p.12-19, 2017.

2016

Bark D., Yousefi A., Forleo M., Vaesken A., Heim F. et Dasi L., “Reynolds shear stress for textile prosthetic heart valves in relation to fabric design” – Journal of the mechanical behavior of biomedical materials, vol.60, p.280-287, 2016.
Ben Azouz K., Bekkour K. et Dupuis D., “Influence of the temperature on the rheological properties of bentonite suspensions in aqueous polymer solutions” – Applied Clay Science, vol.123, p.92-98, 2016.
Ben Messaoud W., Bueno M.-A. et Lemaire-Semail B., “Relation between human perceived friction and finger friction characteristics” – Tribology International, vol.98, p.261-269, 2016.
Ben Messaoud W., Giraud F., Lemaire-Semail B., Amberg M. et Bueno M.-A., “Amplitude control of an ultrasonic vibration for a tactile stimulator” – IEEE/ASME Transactions on Mechatronics, vol.21, n°3, p.1692-1701, 2016.
Guignier C., Bueno M.-A., Camillieri B., Le Huu T., Oulanti H. et Durand B., “Tribological behaviour and adhesion of carbon nanotubes grafted on carbon fibres” – Tribology International, vol.100, p.104-115, 2016.
Hamdi B., Gottschalk-Gaudig T., Balard H., Brendlé E., Nedjari N. et Donnet J.-B., “Ageing process of some pyrogenic silica samples exposed to controlled relative humidities: Part I: Kinetic of water sorption and evolution of the surface silanol density” – Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.491, p.62-69, 2016.
Heim F. et Chakfé N., “Commentary on ‘Displacement Forces in Stent Grafts. Influence of Diameter Variation and Curvature Asymmetry’” – European Journal of Vascular and Endovascular Surgery, vol.52, n°2, p.157, 2016.
Hekmati A.-H., Khenoussi N., Nazir A., Adolphe D., Schacher L. et Drean J.-Y., “A Facile Approach for Sample Preparation of Electrospun Polyamide-6 Nanoweb for Mechanical Characterization” – Experimental Techniques, vol.40, n°6, p.1549-1554, 2016.
Laouamri H., Giljean S., Arnold G., Kolli M., Bouaouadja N. et Tuilier M.-H., “Roughness influence on the optical properties and scratch behavior of acrylic coating deposited on sandblasted glass” – Progress in Organic Coatings, vol.101, p.400-406, 2016.
Marot L., De Temmerman G., Van den Berg M.-A., Renault P.-O., Covarel G., Joanny M., Travère J.-M., Steiner R., Mathys D. et Meyer E., “ITER first mirror mock-ups exposed in Magnum-PSI” – Nuclear Fusion, vol.56, n°6, p.066015, 2016.
Mert E., Böhnisch S., Psikuta A., Bueno M.-A. et Rossi R., “Contribution of garment fit and style to thermal comfort at the lower body” – International journal of biometeorology, vol.60, n°12, p.1995-2004, 2016.
Oertel A., Khenoussi N., Schacher L., Adolphe D. et Graftieaux H., “Optimization of meta-aramid electrospun nanofibers productivity through wire-based electrospinning setup scale up” – Journal of Industrial Textiles, 2016.
Reiners P., Kyosev Y., Schacher L., Adolphe D. et Küster K., “Experimental investigation of the influence of wool structures on the stab resistance of woven body armor panels” – Textile Research Journal, vol.86, n°7, p.685-695, 2016.
Tourlonias M. et Bueno M.-A., “Experimental simulation of friction and wear of carbon yarns during the weaving process” – Composites Part A: Applied Science and Manufacturing, vol.80, p.228-236, 2016.
Vaesken A., Pidancier C., Chakfe N. et Heim F., “Hybrid textile heart valve prosthesis: preliminary in vitro evaluation” – Biomedical Engineering-Biomedizinische Technik, 2016.
Wanko A., Laurent J., Bois P., Mosé R., Wagner-Kocher C., Bahlouli N., Tiffay S., Braun B. et Provo kluit P.-W., “Assessment of rock wool as support material for on-site sanitation: hydrodynamic and mechanical characterization” – Environmental technology, vol.37, n°3, p.369-380, 2016.

Chapitres d’ouvrage

2019

Bueno, M. A. and B. Camillieri (2019). 4 – Structure and mechanics of knitted fabrics. Structure and Mechanics of Textile Fibre Assemblies. P. Schwartz, Woodhead Publishing: 84-115.
Camillieri, B. and M. A. Bueno (2019). Tricots 3D : fabrication additive tricotée. Techniques de l’Ingénieur N4610 V1: 1-15.
Rossi, R. M., G. Fortunato, S. Nedjari, A. Morel, F. Heim, J.-F. Osselin and M.-A. Bueno (2019). 9 – Mechanical properties of medical textiles. Structure and Mechanics of Textile Fibre Assemblies (Second Edition). P. Schwartz, Woodhead Publishing: 301-340.

2018

Adolphe D. et Dolez P., “Advanced strength testing of textiles” in Advanced Characterization and Testing of Textiles, Elsevier, p.25-57, 2018.
Mahjoub W., Gourlot J.-P., Drean J.-Y. et Harzallah O., “Impact of the Bijective Relationship between Single and Bundle Cotton Fiber’s in Cotton Breeding Programs” in Past, Present and Future Trends in Cotton Breeding, p.45-61, 2018.

2017

Elamri A., Zdiri K., Harzallah O. et Lallam A., “Progress in Polyethylene Terephthalate Recycling” in Polyethylene Terephthalate: Uses, Properties and Degradation, Nova Science Publishers, p.155-186, 2017.
Mahjoub W., Harzallah O. et Drean J.-Y., “Cotton Fibre Tensile Properties” in Cotton Fibres: Characteristics, Uses and Performance, Nova Science Publishers, p.115-134, 2017.
Shah Hosseini N. et Khenoussi N., “Structuring of electrospun nanofiber mats by 3D printing methods” in Electrospun Materials for Tissue Engineering and Biomedical Applications: Research, Design and Commercialization, Woodhead Publishing, p.73-85, 2017.

2016

Bahlouli N., Wang K., Matadi Boumbimba R., Wagner-Kocher C. et Ahzi S., “Quasistatic to Dynamic Behavior of Particulate Composites for Different Temperatures” in Dynamic Behavior of Materials, vol.1, p.81-86, 2016.
Ben Messaoud W., Bueno M.-A. et Lemaire-Semail B., “Textile Fabrics’ Texture: From Multi-level Feature Extraction to Tactile Simulation” in Haptics: Perception, Devices, Control, and Applications, Springer International Publishing, 10th International Conference, EuroHaptics 2016, London, UK, July 4-7, 2016, Proceedings, Part II, vol.9775, p.294-303, 2016.

Conférences avec actes

2019

Azouzi, M., A. Ben Khalifa, A. Collaine and M. Tourlonias (2019). Characterization of the area roughness of a GFRP by a 3D profilometer after trimming. 8th International Congress on Design and Modeling of Mechanical Systems Hammamet, Tunisie.
Ben Hassine, L., A. Lallam and D. Ivanov (2019). Hydrothemal-dewrinkling of textile surfaces. Conference and Smart Textiles Salon Marrakesh, Maroc.
Ben Lagha, M., D. Adolphe and E. Drean (2019). Development of a printed pressure sensor : integration into a seat cover. The Fiber Society’s Fall Conference, Austin, Etats-Unis.
Bessette, C., M. Tourlonias, M. Decrette, J. Osselin, F. Charleux, D. Coupé and M. A. Bueno (2019). Suivi de la tension et des forces de contact au niveau des fils de chaîne lors du procédé de tissage Interlock 3D. 31ème Journées Internationales Francophones de Tribologie (JIFT), Tours, France.
Boughamoura, I., A. Sinoimeri and O. Harzallah (2019). The investigation of crimp and spinfinish effects on the processing behavior of polyaramide fibers during spinning process. 7th International Conference on Intelligent Textiles & Mass Costomisation, Marrakech, Maroc.
Bourceret, A., M. Zaoui, D. Quilliot, Y. Gaillard, S. Giljean, C. Rousselot, M. J. Pac and F. Richard (2019). Modélisation du lien entre la dureté et la période d’empilement dans un revêtement métal/céramique nano-architecturé en multicouche. 24ème Congrès Français de Mécanique, Brest, France.
Bueno, M. A. (2019). Expérience préliminaire de travail en îlots et évaluation en îlots bonifiés en bac +4 et 5. 24ème Congrès Français de Mécanique, Brest, France.
Camillieri, B. (2019). Retours d’expérience d’une classe inversée en école d’ingénieurs niveau L3. 24ème Congrès Français de Mécanique, Brest; France
Collaine, A., M. Azouzi, K. Srihi, J. Freyburger, C. Jordan, A. Ben Khalifa and M. Tourlonias (2019). Mise en place d’une manipulation de mesure de vibrations lors de l’usinage par détourage de composites UD GFRP. 24ème Congrès Français de Mécanique, Brest, France.
Ebraheem, Y., E. Drean and D. Adolphe (2019). A new universal automatic manipulation system for fabrics. The fiber society spring conference, Hong Kong, Chine.
Gautier, K. (2019). Etude du tack des préimprégnés. 24ème Congrès Français de Mécanique, Brest, France.
Guignier, C., B. Camillieri, M. Schmid, R. Rossi and M. A. Bueno (2019). Chaussette instrumentée pour la mesure de la pression et du frottement. 24ème Congrès Français de Mécanique Brest, France.
Krim, S., S. Giljean, C. Marsiquet, K. Loucif and M.-J. Pac (2019). Hardness of nickel electrodeposition on aluminium alloys : influence of temperature and duration of heat treatment. 14th international conference Local Mechanical Properties, Prague, République Tchèque.
Leclinche, F., D. Adolphe, E. Drean and V. Zimpfer (2019). Assessment of the fabric’s wear by sound measurements on soldier’s uniforms. 19th World textile conference AUTEX Ghent, Belgique
Mahjoub, W., O. Harzallah, J. Y. Drean and J.-P. GOURLOT (2109). Cotton fibers characterization : the importance of the viscous element. The Fiber Society Conference, Hong-Kong, Chine.
Mersha, Y., M. Goddard, N. Khenoussi, D. Adolphe, P. Raharivelomanana, D. Achenef and N. Govidan (2019). Functionalization of electrospun nanoweb using Ethiopian endemic plant. 19th World textile conference AUTEX, Ghent, Belgique.
Shah Hosseini, N., N. Bölgen, N. Khenoussi, S. Ceylan, D. Göktürk, L. Schacher and D. Adolphe (2019). Design of patterned polyurethane scaffolds for tissue engineering applications. 19th Worl textile conference AUTEX, Ghent, Belgique
Tourlonias, M., M. A. Bueno, C. Jordan and D. Poquillon (2019). Etude expérimentale du frottement de fils carbone : effet de l’ensimage. 24ème Congrès Français de Mécanique, Brest, France.
Vafaee, M., M.-E. Olya, J. Y. Drean, O. Harzallah and A. Hekmati (2019). Study of pollutant particles status of colored textile wastewater in semi-batch oxidative reactor. 19th World Textile Conference Autex, Ghent, Belgique.
Vafaee, M., M.-E. Olya, J. Y. Drean, A. Hekmati and O. Harzallah (2019). Application of Zno/W/Ag as a synthesized nanophotocatalyst for dye removal of textile wastewaters ; A kinetic study. IUPAC World Chemistry Congress, Paris, France.
Zaoui, M., A. Bourceret, Y. Gaillard, S. Giljean, C. Rousselot, M.-J. PAC and F. Richard (2019). Relation between hardness of (Ti, A1) N based multilayered coatings and periods of their stacking. 14th international conference Local Mechanical Properties, Prague, République Tchèque.

2018

Bessette C., Mathieu D., Tourlonias M., Osselin J.-F., Bueno M.-A., Leca A. et Coupé D., “Warp yarn damages prediction regarding to the evolution of yarn tension during 3D weaving process”, 8^th World Conference on 3D Fabrics and Their Applications, Manchester, Angleterre, p.1-11, 2018.
Peyre K., Tourlonias M., Bueno M.-A., Spano F. et Rossi R., “Développement d’un Doigt Artificiel Instrumenté pour Surfaces Textiles”, 30^èmes Journées Internationales Francophones de Tribologie (JIFT 2018), Sophia Antipolis, France, 2018.
Saidane E.-H., Scida D., Pac M.-J. et Ayad R., “Mode-I interlaminar fracture toughness of flax, glass and hybrid flax-glass fibre woven composites”, 7^th International Symposium on Aircraft Materials (ACMA2018), Compiègne, France, 2018.
Tourlonias M., Fassi G., Wielhorski Y. et Bueno M.-A., “Frottement de Torons et de Fibres de Carbone : Influence de l’Angle de Contact”, 30^èmes Journées Internationales Francophones de Tribologie (JIFT 2018), Sophia Antipolis, France, 2018.

2017

Almohamad R., Barbier G. et Drean J.-Y., “New Weaving Concept: Motion Control System Approach”, 19^th NTC, Gabrovo, Bulgaria, p.401-407, 2017.
Balbzioui I., Hasiaoui B., Barbier G., L’Hostis G., Laurent F. et Ibrahim A., “A Combinaison of UV Curing Technology With ATL Process”, ESAFORM 2017, Dublin, Ireland, AIP Publishing, vol.1896, p.1-5, 2017.
Bueno M.-A., “Frottement : de la fibre à la surface textile”, JADH 17 : 19^ème Journées d’Etude sur l’Adhésion, Sainte-Maxime, France, p.21-24, 2017 (conférence invitée).
Collaine A., Khedr Y., Jordan C. et Tourlonias M., “Étude de l’influence des paramètres d’usinage sur des opérations de détourage de composites à renfort fibres de verre”, 23^ème Congrès Français de Mécanique, Lille, France, 2017.
Gassara H.-E., Almuhamed S., Moukadem A., Schacher L., Dieterlen A. et Adolphe D., “Smart wheelchair: integration of multiple sensors”, AUTEX World Textile Conference 2017, Corfu, Grèce, Proceedings IOP Conference Series: Materials Science and Engineering, vol.254, p.1-7, 2017.
Giljean S., Pac M.-J., Marsiquet C., Hasiaoui B., Ibrahim A. et L’Hostis G., “Influence du mode de polymérisation de composites verre/polyester sur leur comportement mécanique”, 23^ème Congrès Français de Mécanique, Lille, France, 2017.
Guignier C., Bueno M.-A., Camillieri B. et Durand B., “Wear of Carbon Nanotubes Grafted on Carbon Fibres and this Influence on the Properties of Composites Materials”, ESAFORM 2017, Dublin, Ireland, vol.1896, p.1-6, 2017.
Imran A., Drean E., Schacher L. et Adolphe D., “Adaptive bra designs for the individuals with special needs”, AUTEX World Textile Conference 2017, Corfu, Grèce, Proceedings IOP Conference Series: Materials Science and Engineering, vol.254, p.1-6, 2017.
Mert E., Psikuta A., Arevalo M., Charbonnier C., Luible-Bär C., Bueno M.-A. et Rossi R., “Quantitative validation of 3D garment simulation software for determination of air gap thickness in lower body garments”, AUTEX World Textile Conference 2017, Corfu, Grèce, Proceedings IOP Conference Series: Materials Science and Engineering, vol.254, p.1-5, 2017.
Mohsenzadeh E., Khenoussi N., Schacher L., Adolphe D., Hemmerlé J., Schneider A., Bahlouli N. et Wagner-Kocher C., “Development of electrospun composite as substitutive diaphragm membrane”, AUTEX World Textile Conference 2017, Corfu, Grèce, Proceedings IOP Conference Series: Materials Science and Engineering, vol.254, p.1-4, 2017.
Peyre K., Tourlonias M., Bueno M.-A., Spano F. et Rossi R., “Conception d’un doigt artificiel à fibre optique polymérique pour application du toucher de surface textile”, 23^ème Congrès Français de Mécanique, Lille, France, 2017.
Tourlonias M., Jordan C., Bueno M.-A. et Poquillon D., “Friction of Carbon Fibre and Influence of Sizing Treatment”, ESAFORM 2017, Dublin, Ireland, vol.1896, p.1-6, 2017.
Yan J., Zhang S., Kuzmichev V. et Adolphe D., “New database for improving virtual system “body-dress””, AUTEX World Textile Conference 2017, Corfu, Grèce, Proceedings IOP Conference Series: Materials Science and Engineering, vol.254, p.172029, 2017.

2016

Decrette M., Osselin J.-F. et Drean J.-Y., “Motorized Jacquard technology for multilayer weaving damages reduction: shed geometry and phase difference”, 7^th world conference on 3D fabrics and their applications, ENSAIT, Roubaix, France, p.9, 2016.
Giljean S., Pac M.-J. et Laouamri H., “Étude de revêtements fonctionnels : application aux polymères acryliques”, Congrès National de la Recherche des IUT (CNRIUT’ 2016), Nantes, France, 2016.
Pac M.-J., Giljean S. et Henry P., “Étude de revêtements fonctionnels : application aux nitrures de titane et d’aluminium nanostructurés”, Congrès National de la Recherche des IUT (CNRIUT’ 2016), Nantes, France, 2016.
Tourlonias M. et Bueno M.-A., “Carbon Interyarn and interfibre friction measurement”, 7^th World Conference 3D Fabrics and their applications, Roubaix, France, p.375-383, 2016.