Outils personnels
Vous êtes ici : Accueil Production scientifique 2011-2016

2011-2016

Actions sur le document

Articles dans des revues avec comité de lecture impactées (ISI Web of Knowledge et/ou Scopus)

1.    BIGERELLE B., GILJEAN S. et ANSELME K., "Existence of a typical threshold in the response of human mesenchymal stem cells to a peak and valley topography" - Acta Biomaterialia, vol.7, n°9, p.3302-3311, 2011, DOI: 10.1016/j.actbio.2011.05.013.
2.    BIGERELLE B., MATHIA T. et GILJEAN S., "Multi-scale characteristics lengths of abraded surfaces: three stages of the grit size effect" - Tribology International, vol.44, n°1, p.63-80, 2011, DOI: 10.1016/j.triboint.2010.08.002.
3.    BIGERELLE B., MAZERAN P. E., GONG W., GILJEAN S. et ANSELME K., "A method to determine the spatial scale implicated in adhesion. Application on human cell adhesion on fractal isotropic surfaces" - Journal of Adhesion, vol.87, p.644-670, 2011.
4.    BILAL M. B., VIALLIER P., HAIDARA H., COLOMBE G. et LALLAM A., "A study of the structural changes during the dyeing process of Ingeo TM fibers of poly(lactic)acid" - Textile Research Journal, vol.81, n°8, p.838-846, 2011.
5.    EREN B., MAROT L., LITNOVSKY A., MATVEEVA M., STEINER R., EMBERGER V., WISSE M., MATHYS D., COVAREL G. et MEYER E., "Reflective metallic coatings for first mirrors on ITER" - Fusion Engineering and Design, vol.86, n°9-11, p.2593-2596, 2011, DOI: 10.1016/j.fusengdes.2010.12.038.
6.    FONTAINE S., DIA S. et RENNER M., "Nonlinear friction dynamics on fibrous materials, application to the characterization of surface quality. Part I: global characterization of phase spaces" - Nonlinear Dynamics, vol.66, n°4, p.625-646, 2011, DOI10.1007/s11071-010-9938-5.
7.    FONTAINE S., DIA S. et RENNER M., "Nonlinear friction dynamics on fibrous materials, application to the characterization of surface quality. Part II: local characterization of phase space by recurrence plots" - Nonlinear Dynamics, vol.66, n°4, p.647-665, 2011, DOI: 10.1007/S11071-011-9968-7.
8.    GILJEAN S., BIGERELLE B., ANSELME K. et HAIDARA H., "New insights on contact angle/roughness dependence on high surface energy materials" - Applied Surface Science, vol.257, n°22, p.9631-9638, 2011, DOI: 10.1016/j.apsusc.2011.06.088.
9.    GIRLEANU M., PAC M.-J., ERSEN O., LOUIS P., WERCKMANN J., ROUSSELOT C. et TUILIER M.-H., "Characterization of nano-structured titanium and aluminium nitride coatings by indentation, transmission electronic microscopy and electron energy loss spectroscopy" - Thin Solid Films, vol.519, n°18, p.6190-6195, 2011.
10.    HEIM F., GENY B., CHAKFE N. et DURAND B., "Textile Heart valve : First Implantation in Vivo" - Journal of Heart Valve Disease, vol.20, p.726-727, 2011.
11.    HEIM F., MARCHAND C., CHAKFE N. et DURAND B., "Textile Heart Valve : Novel Shaping Process and Material Performances. " - Materials and Manufacturing Processes, vol.26, n°10, p.1303-1309, 2011, DOI: 10.1080/10426914.2011.552018.
12.    HENRY P., TAKADOUM J. et BERCOT P., "Depassivation of some metals by sliding friction" - Corrosion Science, vol.53, p.320-328, 2011.
13.    KHELLAF S., KHOFFI F., TABET H., LALLAM A., BOUHELAL S., CAGIAO E., BENACHOUR D. et BALTACALLEJA F. J., "Study of iPP Crosslinking by Means of Dynamic and Steady Rheology Measurements" - Journal of Applied Polymer Science, vol.124, p.3184-3191, 2011.
14.    KHOFFI F., DIEVAL F., CHAKFE N. et DURAND B., "A development of a technique for measuring the compliance of the textile vascular prostheses" - Physics Procedia, vol.21, p.234-239, 2011, DOI : 10.2016/j.phpro.2011.10.035.
15.    KHOFFI F., KHENOUSSI N., HARZALLAH O. et DREAN J.-Y., "Characterization of copper reinforced polyethylene terephthalate filament" - Materials Technology, vol.26, n°3, p.116-120, 2011.
16.    KHOFFI F., KHENOUSSI N., HARZALLAH O. et DREAN J.-Y., "Mechanical Behavior of polyethylene terephtalate/copper composite filament" - Physics Procedia, vol.21, p.240-245, 2011.
17.    LEJAY A., THAVEAU F., BAJCZ C., GEORG Y., KRETZ J. G., DURAND B. et CHAKFE N., "Evolution des stents pour le traitement des lésions de l'artère fémorale superficielle" - Journal des Maladies Vasculaires, vol.36, n°3, p.169-173, 2011.
18.    MARCHAND C., HEIM F., DURAND B. et CHAKFE N., "Nitinol stent for percutenous heart valve implantation : material shape setting" - Materials and Manufacturing Processes, vol.26, n°2, p.181-187, 2011.
19.    Praëne J.-M. et Bueno M.-A., "Compressionnal behavior of hairy and non hairy textile fabrics" - Mechanics of  Advanced Materials and Structures, vol.18, n°5, p.373-388, 2011, 10.1080/15376494.2010.524970.
20.    ROESSNER D., DREAN J.-Y. et OSSELIN J.-F., "Interlock Fabric Implant Tearing Measurement" - Experimental Techniques, vol.36, n°4, p.49-56, 2011, DOI : 10.1111/j.1747-1567.2011.00753.x.
21.    ROESSNER D., DREAN J.-Y. et OSSELIN J.-F., "Caractérisation en traction de l´assemblage de composite caoutchouc à renfort textile" - Revue des Composites et Matériaux Avancés, vol.21, n°1, p.57-67, 2011, DOI: 10.3166/RCMA.21.57-67.
22.    SEJRI N., HARZALLAH O., VIALLIER P. et BEN NASRALLAH S., "Influence of wetting phenomenon on the characteristics of a sized yarn" - Textile Research Journal, vol.81, n°3, p.280-289, 2011.
23.    SELSABIL EL-GHEZAL J., FONTAINE S., WAGNER-KOCHER C., MOUSTAGHFIR N. et DURVILLE D., "Transverse compression behaviour of polyamide 6.6 rovings : Experimental Study" - Textile Research Journal, vol.82, n°1, p.77-87, 2011.
24.    SELSABIL EL-GHEZAL J., SAHNOUN M., BABAY A., CHEIKROUHOU M., SCHACHER L. et ADOLPHE D. C., "Predicting compression and surfaces properties of knits using fuzzy logic and neural networks techniques" - International Journal of Clothing Science and Technology, vol.23, n°5, p.294-309, 2011.
25.    ABOE M., GOURLOT J.-P., GOZE E., SINOIMERI A. et HUBLE P., "New findings on within bale repeatability of standardized instruments for testing cotton measurements on cotton fiber produced in West and Central Africa" - Textile Research Journal, vol.82, n°14, p.1469-1484, 2012.
26.    AHMAD S., SINOIMERI A. et NOWROUZIEH S., "The effect of the Sliver Fiber Configuration on the Cotton Inter-fiber Frictional Forces" - Journal of Engineered Fibers and Fabrics, vol.7, n°2, p.87-93, 2012.
27.    ALALI M., DREAN J.-Y., TULEMAT M.-A. et OSSELIN J.-F., "Fatigue Behaviour of Inflated Woven Compound Pocket Fabrics" - Experimental Techniques, vol.37, n°1, p.27-34, 2012, DOI: 10.1111/j.1747-1567.2011.00750.x.
28.    ALMUHAMED S., KHENOUSSI N., SCHACHER L., ADOLPHE D. C. et BALARD H., "Measuring of Electrical Properties of MWNT-reinforced PAN nanocomposites" - Journal of Nanomaterials, vol.2012, n°Article ID 750698, p.1-7, 2012, DOI: 10.1155/2012/750698.
29.    BASIT A., L'HOSTIS G. et DURAND B., "Multi-shape memory effect in shape memory polymer composites" - Materials letters, vol.74, p.220-222, 2012, DOI: 10.1016/j.mathlet.2012.01.113.
30.    BASIT A., L'HOSTIS G. et DURAND B., "Thermo-Mechanical Testing of Epoxy Shape Memory Polymer Composites" - Advanced Materials Research, vol.570, n°3, p.15-23, 2012, DOI :10.4028/www.scientific.net/AMR.570.15.
31.    BIGERELLE B., ANSELME K. et GILJEAN S., "Biocompatibility of the Electrical Discharge Machining Process on Titanium Surfaces" - International Journal of Mechatronics and Manufacturing Systems, vol.5, p.419-430, 2012, DOI: 10.1504/IJMMS.2012.049970.
32.    Camillieri B., Bueno M.-A., Rossi R. et Derler S., "Brush model to predict the friction of hairy textile fabrics from indentation measurements" - Wear, vol.296, p.519-527, 2012, 10.1016/j.wear.2012.07.027.
33.    CHAOUCH W., DIEVAL F., CHAKFE N. et DURAND B., "The study of vascular prostheses ageing by infrared" - International Journal of Polymeric Materials, vol.61, n°6, p.410-423, 2012, DOI : 10.1080/009147037.2011.59360.
34.    COVAREL G., BENSAID B., BODDAERT X., GILJEAN S., BENABEN P. et LOUIS P., "Adhesion characterization of flexible organic Thin Film Transistor interfaces using scratch test" - Surface and Coatings Technology, vol.211, p.138-142, 2012.
35.    DIEVAL F., KHOFFI F., MIR R., LE NOUEN D., CHAKFE N. et DURAND B., "Long term bio-stability of PET vascular prosthesis" - International Journal of Polymer Science, vol.2012, n°Article ID 646578, p.1-14, 2012, DOI: 10.1155:2012/646578.
36.    DJILANI C., ZAGHDOUBI R., MODARRESSI A., ROGALSKI M., DJAZI F. et LALLAM A., "Elimination of organic micropollutants by adsorption on activated carbon prepared from agricultural waste" - Chemical Engineering Journal, vol.189-190, p.203-212, 2012, DOI: 10.1016/j.cej.2012.02.059.
37.    Gassmann V., Knittel D., Pagilla P. R. et Bueno M.-A., "Fixed-Order H-infinity Tension Control in the Unwinding Section of a Web Handling System Using a Pendulum Dancer" - IEEE Transactions on Control Systems Technology, vol.20, n°1, p.173-180, 2012, 10.1109/tcst.2011.2107554.
38.    GILJEAN S., BIGERELLE B. et ANSELME K., "Roughness Statistical Influence on Cell Adhesion Using Profilometry and Multiscale Analysis" - Scanning, vol.36, n°1, p.2-10, 2012, DOI: 10.1002/sca.21061.
39.    HEIM F., MARCHAND C., DURAND B. et CHAKFE N., "A novel heart valve stent design : mechanical interaction with the aortic root" - Computer Methods in Biomechanics and Biomedical Engineering, vol.15, n°2, p.157-165, 2012, DOI : 10.1080/10255842.2010.518961.
40.    KHENOUSSI N., DREAN E., SCHACHER L., ADOLPHE D. C. et BALARD H., "Nanofibers production : study and development of electro-spinning device" - Experimental Techniques, vol.36, n°2, p.32-39, 2012, DOI: 10.1111/j.1747-1567.2011.00704.x.
41.    Kuhm D., Knittel D. et Bueno M.-A., "Robust control strategies for an electric motor driven accumulator with elastic webs" - ISA Transactions, vol.51, n°6, p.732-742, 2012, DOI: 10.1016/j.isatra.2012.05.004.
42.    LABAT R., MAGNENET V., LEAL E., ARNOLD G., RAHOUADJ R., WANG X., DEMEURIE F., MAGDALOU J., CASTELLI DE CARVALHO M. et BRANDAO L.-M., "Low-level laser therapy in collagenase-induced Achilles tendinitis in rats. Analyses of biochemical and biomechanical aspects" - Journal of Orthopaedic Research, vol.30, n°12, p.1945-1951, 2012, DOI: 10.1002/jor.22156.
43.    LAURIDANT N., DAOU J., ARNOLD G., SOULARD M., NOUALI H., PATARIN J. et FAYE D., "Key steps influencing the formation of ZSM-5 films on aluminium substrates" - Microporous and Mesoporous Materials, vol.152, p.1-8, 2012, DOI: 10;1016/j.micromeso.2011.12.012.
44.    LEJAY A., THAVEAU F., GIRSOWICZ E., GEORG Y., HEIM F., DURAND B. et CHAKFE N., "Stent Evolution for Peripheral Arterial Disease" - Journal of Cardiovascular Surgery, vol.53, p.171-179, 2012.
45.    MAROT L., DE LOS ARCOS T., BUNZLY A., WACKERLIN C., STEINER R., OELHAFEN P., MEYER E., MATHYS D., SPATIG P. et COVAREL G., "Nanocomposite of carbon nanotube embedded in a (TiAl)N coated film" - Surface and Coatings Technology, vol.212, p.223-228, 2012.
46.    PODPOVITNY M., SCHACHER L., GERSAK J. et ADOLPHE D. C., "Development of a new protective gown for dentists" - Tekstil, vol.60, n°10, p.493-503, 2012.
47.    SABBATIER G., LE NOUEN D., CHEVALLIER P., DURAND B., LAROCHE G. et DIEVAL F., "Air Spun poly(lactic acid) nanofiber scaffold degradation fo vascular tissue engineering: A1 H NMR study" - Polymer Degradation and Stability, vol.97, n°8, p.1520-1526, 2012, doi : 10.1016/j.polymdegradstab.2012.04.017.
48.    SELSABIL EL-GHEZAL J., ADOLPHE D. C., SAHNOUN M., BABAY-DHOUIB A., SCHACHER L. et CHEIKROUHOU M., "Intelligent Techniques for Modeling the Relationships between Sensory Attributes and Instrumental Measurements of Knitted Fabrics" - Journal of Engineered Fibers and Fabrics, vol.7, n°3, p.88-97, 2012.
49.    TUILIER M.-H., PAC M.-J., ANOKHIN D., IVANOV D., ROUSSELOT C. et THIAUDIERE D., "Nano-structured titanium and aluminium nitride coatings. Study by grazing incidence X-ray diffraction and X-ray absorption and anomalous diffraction" - Thin Solid Films, vol.526, p.269-273, 2012.
50.    BASIT A., L'HOSTIS G. et DURAND B., "High Actuation properties of shape memory polymer composite actuator" - Smart Materials and Structures, vol.22, n°2, 2013, DOI: 10.1088/0964-1726/22/2/025023.
51.    BASIT A., L'HOSTIS G., PAC M.-J. et DURAND B., "Thermally activated composite with two-way and multi-shape memory effects" - Materials vol.6, n°9, p.4031-4045, 2013, DOI: 10.3390/ma6094031.
52.    Baussan E., Bueno M.-A., Rossi R. et Derler S., "Analysis of current running sock structures with regard to blister prevention" - Textile Research Journal, vol.83, n°8, p.836-848, 2013, 10.1177/0040517512461698.
53.    BELIBI P., DAOU J., NDJAKA J.-M. B., MICHELIN L., BRENDLE J., NSOM B. et DURAND B., "Tensile and water barrier properties of cassava starch composite films reinforced by synthetic zeolite and beidellite" - Journal of Food Engineering, vol.115, n°3, p.339-346, 2013, DOI: 10.1016/j.foodeng.2012.10.027.
54.    BODDAERT X., COVAREL G., BENSAID B., MATTEI M., BENABEN P. et BOIS J., "Organic ultrathin adhesion on compliant substrate using scratch test technique" - Thin Solid Films vol.528, p.194-198, 2013, DOI: 10.1016/j.tsf.2012.07.138.
55.    Bueno M.-A., Bocquet R., Tourlonias M., Rossi R. et Derler S., "Study of Friction Mechanisms of Hairy Textile Fabrics" - Wear, vol.303, p.343-353, 2013, 10.1016/j.wear.2013.03.03.
56.    CALIN M., CURTEZA A., KHENOUSSI N., ALMUHAMED S., SCHACHER L., ADOLPHE D. C., TOMA S. et AGOP M., "Morphological Properties of Polyamide 6-CNT Nanofibers obtained by electrospinning method" - Metalurgia International, vol.18, p.19-25, 2013.
57.    CALIN M., CURTEZA A., KHENOUSSI N., ALMUHAMED S., SCHACHER L., AGOP M. et ADOLPHE D., "Electrical Properties of PA6-CNT Nanofibers Obtained by Electrospinning Method" - Metalurgical International, vol.18, n°2, p.23-25, 2013.
58.    CHAGNON L., ARNOLD G., GILJEAN S. et BROGLY BISTAC S., "Elastic recovery and creep properties of waterborne two-component polyurethanes investigated by micro-indentation" - Progress in organic Coatings, vol.76, n°10, p.1337-1345, 2013, DOI: 10.1016/j.porgcoat.2013.04.003.
59.    CHAKFE N. et HEIM F., "Commentary on "Electrical potentials between stent-grafts made from different metals induce negligible corrosion'" - European Journal of Vascular and Endovascular Surgery, vol.46, n°3, p.438-439, 2013, DOI: 10.1016/j.ejvs.2013.07.009.
60.    DAOU J., LAURIDANT G., ARNOLD G., JOSIEN L., FAYE D. et PATARIN J., "Synthetic of MFI/EMT zeolite bi-layer films for molecular decontamination" - Chemical Engineering Journal, vol.234, p.66-73, 2013, DOI: 10/1016/j.cej.1013.08.103.
61.    GEORG Y., SETTEMBRE N., MARCHAND C., LEJAY A., THAVEAU F., DURAND B. et CHAKFE N., "Poor Long-term stability of the Corvita Abdominal Stentgraft" - European Journal of Vascular and Endovascular Surgery, vol.47, n°2, p.160-163, 2013, DOI: 10.1016/j.ejvs.2013.10.010.
62.    HEIM F., CHAKFE N. et DURAND B., "Textile Heart Valve Prosthesis from Fabric Design Criteria to Early in Vivo Performances" - Journal of Heart Valve Disease, vol.22, n°3, p.361-367, 2013.
63.    HEKMATI A. H., RASHIDI A., GHAZISAEIDI R. et DREAN J.-Y., "Effect of Needle length, electrospinning distance, and solution concentration on morphological properties of polyamide 6, electrospun nanowebs" - Textile Research Journal, vol.83, n°14, p.1452-1465, 2013.
64.    HENRY P., PAC M.-J., ROUSSELOT C. et TUILIER M.-H., "Wear mechanisms of titanium and aluminium nitride coatings : a microtribological approach" - Surface and Coatings Technology, vol.223, p.79-86, 2013, DOI: 10.1016/j.surfcoat.2013.02.033.
65.    KECHICHE M., BAUER F., HARZALLAH O. et DREAN J.-Y., "Development of piezoelectric coaxial filament sensors P(VDF-TrFE)/copper for textile structure instrumentation" - Sensors and Actuators A. : Physical, vol.204, p.122-130, 2013, DOI: 10.1016/j.sna.2013.10.007.
66.    LAURIDANT G., DAOU J., ARNOLD G., NOUHALI H., PATARIN J. et FAYE D., "Zeolite hybrid films for space decontamination" - Microporous and Mesoporous Materials, vol.112, p.36-43, 2013, DOI: 10.1016/j.micromeso.2013.01.017.
67.    LAURIDANT N., DAOU J., ARNOLD G., PATARIN J. et FAYE D., "MFI/BEA hybrid coating on aluminum alloys" - Microporous and Mesoporous Materials, vol.166, p.79-85, 2013, DOI: 10.1016/j.micromeso.2012.04.057.
68.    LEJAY A., GEORG Y., HEIM F., DIEVAL F., TARTAGLIA E., THAVEAU F., LEMAGNEN J.-F., DURAND B. et CHAKFE N., "Properties and challenges in materials used as vascular and endovascular devices" - Journal of Cardiovascular Surgery, vol.54, p.167-182, 2013.
69.    LUKONGE E. E., ABOE M., GOZE E., SINOIMERI A. et GOURLOT J.-P., "Application of a published methodology for evaluating within-bale repeatability of measurements obtained with standardizes instruments for testing cotton : Gossypium hirsutum in Eastern and " - Textile Research Journal, vol.84, n°2, p.187-199, 2013.
70.    MALEK A. S., DREAN J.-Y., BIGUE L. et OSSELIN J.-F., "Optimization of automated online fabric inspection by fast Fourier Transform (FFT) and cross correlation" - Textile Research Journal, vol.83, n°3, p.256-268, 2013.
71.    MARCOS R., ARNOLD G., MAGNENET V., RAHOUADJ R., MAGDALOU J. et LOPEZ-MARTINS R., "The protective effect of Low Level Laser Therapy against tendinitis : Biomechanical and biochemical analysis" - Journal of the Mechanical Behavior of Biomedical Materials vol.29, p.272-285, 2013, DOI: 10.1016/j.jmbbm/2013.08.028.
72.    MOUSTAGHFIR N., SELSABIL EL-GHEZAL J., DURVILLE D., FONTAINE S. et WAGNER-KOCHER C., "Transverse compression behavior of textile rovings : finite element simulation and experimental study" - Journal of materials science, vol.48, n°1, p.462-472, 2013, DOI: 10.1007/s10853-012-6760-0.
73.    NDAPEU D., NJEUGNA E., BROGLY BISTAC S., DREAN J.-Y., FOGUE M. et NGENEFEME FOBA J., "Experimental Study of the Drying Kinetics of the Coconut Shells (Nucifera) of Cameroon" - Materials Sciences and Applications, vol.4, p.822-830, 2013.
74.    NJEUGNA N., SCHACHER L., ADOLPHE D. C., DUPUIS R., AUBRY E., SCHAFFHAUSER J., STREHLE P. et MESSAOUD M., "Physical and compressional characteristics of a novel 3D fibrous structure - application in comparison between PU foam and 3D fibrous structure" - The Journal of the Textile Institute, vol.11, p.1237-1446, 2013.
75.    REINHOLDT M. X., BRENDLE J., TUILIER M.-H., KALIOAGUINE et AMBROISE E., "Hydrothermal synthesis and charactérization of Ni-Al Montmorillonite-Like Phyllosilicates" - Nanomaterials, vol.3, n°1, p.48-69, 2013.
76.    SHAFI A., SCHACHER L. et ADOLPHE D. C., "Washing effects on electric and signal transmission properties of Textile based embroidered circuits" - Information - An International Interdisciplinary Journal, vol.16, n°3, p.2047-2052, 2013.
77.    SIKAME TAGNE N. R., NJEUGNA E., FOGUE M., DREAN J.-Y. et FOKWA D., "Study of Water Diffusion through Raffia Vinifera fibres of the Stem from Bandjoun-Cameroon : Case of Drying Kinetics" - Research Journal of Applied Sciences, Engineering and Technology, vol.6, n°19, p.3547-3558, 2013.
78.    TEODORESCU M., KHENOUSSI N., SCHACHER L., ADOLPHE D. C., AGOP M. et TOMA S., "Surface Morphology Influence in Structural Colours Displayed by Spin-Coated Thin Film" - Metalurgia International, vol.18, n°2, p.27-29, 2013.
79.    ALMUHAMED S., KHENOUSSI N., BONNE M., SCHACHER L., LEBEAU B., ADOLPHE D. et BRENDLE J., "Electrospinning of PAN nanofibers incorporating SBA 15 type ordered mesoporous silica particles" - European Polymer Journal, vol.54, p.71-78, 2014.
80.    AZAZA A., JAOUACHI B., DOUIK A., SCHACHER L. et ADOLPHE D., "Evaluation of residual bagging volume using 3D image analysis technique" - The Journal of the Textile Institute, vol.106, n°1, p.168, 2014, DOI: 10.1080/00405000.2014.895090.
81.    BELIBI P., DAOU J., NDJAKA J.-M. B., NSOM B., MICHELIN L. et DURAND B., "A comparative study of some properties of cassava and tree cassava starch films" - Physics Procedia, vol.55, p.220--226, 2014, DOI: 10.1016/j.phpro.2014.07.032.
82.    Bueno M.-A., Lemaire-Semail B., Amberg M. et Giraud F., "A simulation from a tactile device to render the touch of textile fabrics: a preliminary study on velvet" - Textile Research Journal, vol.84, p.1428-1440, 2014, 0.1177/0040517514521116.
83.    CHAOUCH W., KHOFFI F., DIEVAL F., CHAFKE N. et DURAND B., "Physical evaluation of explanted vascular prostheses" - International Journal of Polymeric Materials, vol.64, n°4, p.169-174, 2014, DOI: 10.1080/00914037.2014.886249.
84.    DUPUIS D., BEKKOUR K. et BEN AZOUZ K., "On the modeling of the rheological behaviour of bentonite dispersions in polymer solutions" - Applied Rheology, vol.24, n°24283, p.1-9, 2014, DOI: 10.3933/ApplRheol-24-24283.
85.    GEORG Y., MATHIEU D., CHESSEAU B., LUCEREAU B., DURAND B. et CHAKFE N., "Another Vision of the Comprehension of the Phenomena of Proximal Anchoring of Thoracic Stentgrafts" - Annals of Vascular Surgery, vol.28, n°6, p.1370, 2014, DOI: 10.1016/j.avsg.2014.06.040.
86.    GILJEAN S., BIGERELLE B. et ANSELME K., "Roughness Statistical Influence on Cell Adhesion Using Profilometry and Multiscale Analysis " - Scanning, vol.36, p.2-10, 2014.
87.    HADDAR W., BENTICHA M., GUESMI A., KHOFFI F. et DURAND B., "A novel approach for a natural dyeing process of cotton fabric with Hibiscus mutabilis (Gulzuba) : Process development and optimization using statistical analysis" - Journal of Cleaner Production, vol.68, p.114-120, 2014, DOI: 10.1016/j.jclepro.2013.12.066.
88.    HAMMAMI M. A., KRIFA M. et HARZALLAH O., "Centrifugal Force Spinning of PA6 Nanofibers - Processability and Morphology of Solution-Spun Fibers" - The Journal of the Textile Institute, vol.105, n°6, p.637-647, 2014.
89.    HEIM F., GASSER A., KHOFFI F. et BLONDEL P., "Textile Heart Valve :First in-Vivo Experiment in the Aortic Position" - Journal of Heart Valve Disease, vol.23, n°3, p.316-318, 2014.
90.    HERNANDEZ J., ROSENTHAL M., BATAEV V., SMIRNOV A., BAZARKINA V., KRIVEZHENKO D., PETRINA D., OGNEV A. Y., LALLAM A. et IVANOV D., "Effect of Multilayer Carbon Nanotubes on Mechanical Properties and Phase Tranformations of Ultra-Molecular-Weight Polyethylene during Drawing" - Nanotechnologies in Russia, vol.9, p.269-273, 2014.
91.    KENOUFI A., OSSELIN J.-F. et DURAND B., "System adjustement for targeted performance combining symbolic regression and set inversion" - Inverse Problems in Science and Engineering, vol.22, n°2, p.351-358, 2014, DOI : 10.1080/17415977.2013.790384.
92.    KHOFFI F., HEIM F., CHAKFE N. et LEE T., "Transcatheter fiber heart  valve : Effect of crimping on material performances" - Journal of Biomedical Materials Research: Part B Applied Biomaterials, vol.103, n°7, p.1488-1497, 2014, DOI : 10.10002/JBM;B;33330.
93.    KHOFFI F., MATHIEU D., DIEVAL F., CHAFKE N. et DURAND B., "Compliance properties of collagen-coated polyethylene terephthalate vascular prostheses" - Journal of Applied Biomaterials & Functional Materials, vol.12, n°3, p.163-171, 2014, DOI: 10.5301/jabfm.5000189.
94.    KO N., SABBATIER G., CUNNINGHAM A., LAROCHE G. et JK O., "Air-Spun PLA Nanofibers Modified with Reductively Sheddable Hydrophilic Surfaces for Vascular Tissue Engineering : Synthesis and Surface Modification" - Macromolecular Rapid Communications, vol.35, n°4, p.447-453, 2014, DOI: 10.1002/marc.201300609.
95.    Kuhm D., Bueno M.-A. et Knittel D., "Fabric friction behavior: study using capstan equation and introduction into a fabric transport simulator" - Textile Research Journal, vol.84, n°10, p.1070-1083, 2014, 10.1177/0040517513515313.
96.    LAPLANCHE M.-A., DREAN E., CONVERT R. et SCHACHER L., "New method to measure compression stockings transparency" - Journal of Industrial Textiles, vol.43, n°4, p.577-592, 2014.
97.    MEHMOOD A., BASSET M., ORJUELA R., DUPUIS R. et DREAN J.-Y., "Modelling and experimental validation of Textile Pockets based active inflatable device" - ISA Transactions, vol.53, n°6, p.1881-91, 2014.
98.    PAC M.-J., GILJEAN S., ROUSSELOT C., RICHARD F. et DELOBELLE P., "Microstructural and elasto-plastic material parameters identification by inverse finite elements method of Ti(1-x)AlxN(0 <x<1) sputtered thin films from Berkovich nano-indentation experiments" - Thin Solid Films, vol.569, p.81-92, 2014, DOI : 10.1016/j.tsf.2014.07.037.
99.    SABBATIER G., ABADIE P., DIEVAL F., DURAND B. et LAROCHE G., "Evaluation of an air spinning process to produce tailored biosytnthetic nanofiber scaffolds" - Materials Science and Engineering: Part C Materials for Biological Applications, vol.35, p.347-353, 2014, DOI : 10.1016/j.msec.2013.11.004.
100.    SIKAME TAGNE N. R., NJEUGNA E., FOGUE M., DREAN J.-Y., NZEUKOU A. et FOKWA D., "Study of water Absorption in Raffia vinifera Fibres from Bandjoun,Cameroon" - The Scientific World Journal, vol.2014, n°Article ID 912380, p.11 pages, 2014, DOI : 10.1155/2014/912380.
101.    VAESKEN A., HEIM F. et CHAKFE N., "Fiber Heart valve prosthesis : Influence of the fabric construction parameters on the valve fatigue performances" - Journal of the Mechanical Behavior of Biomedical Materials, vol.40, p.69-74, 2014, DOI: 1016/jmbbm.
102.    WAFA H., BEN TICHA M., GUESMI A., KHOFFI F. et DURAND B., "A Novel approach for a natural dyeing proces of cotton fabric with Hibisucs Mutabilis (Gulzuba) : process development and optimization using statistical analysis" - Journal of Cleaner Production, vol.68, p.114-120, 2014.
103.    WEISSER P., BARBIER G., RICHARD C. et DREAN J.-Y., "Characterization of the coagulation process : wet-spinning tools development and void fraction evaluation" - Textile Research Journal, vol.80, n°11, p.1210-1219, 2014, DOI: 1177/0040517514557469.
104.    AUVRAY C., ARNOLD G. et ARMAND G., "Determining the micro-mechanical properties of different constituents of partially saturated argillite using nano-indentation tests" - Engineering Geology, vol.191, p.61-70, 2015, DOI: 10.1016/j.enggeo.2015.02.010.
105.    BENYOUSSIF Y., ABOULHROUZ S., EL ACHABY M., CHERKAOUI O., LALLAM A., EL BOUCHTI M. et ZHOUILLY M., "Preparation and Properties of Bionanocomposite films reinforced with Nanocellulose isolated from Moroccan Alfa Fibres" - AUTEX Research Journal, vol.15, n°3, p.164-172, 2015, DOI : 10.1515/aut-2015-0011.
106.    BODIN F., JUNG C., DIEVAL F., CHAKFE N., WISNIEWSKI C., BRUANT-RODIER C. et HEIM F., "Aging of retrieved gel breast implants : a comparison between two product generations" - Journal of the Mechanical Behavior of Biomedical Materials, vol.46, p.11-22, 2015.
107.    Bueno M.-A., Lemaire-Semail B., Amberg M. et Giraud F., "Pile surface tactile simulation: role of the slider shape, texture close to fingerprints and the joint-stiffness" - Tribology Letters, vol.59, n°1, p.1-12, 2015, 10.1007/s11249-015-0555-9.
108.    CALIN M., MANEA L., SCHACHER L., ADOLPHE D., LEON A., POTOP G. L. et AGOP M., "Measuring the Electrical Properties of MWNT-PA6 Reinforced Nanocomposites" - Journal of Nanomaterials, vol.2015, n°Article ID 514501, p.1-9, 2015, DOI: 10.1155/2015/514501.
109.    Camillieri B. et Bueno M.-A., "Indentation of hairy surfaces: role of friction and entanglement" - Tribology International, vol.83, p.120-129, 2015, 10.1016/j.triboint.2014.11.009.
110.    Cornuault P.-H., Carpentier L., Bueno M.-A., Cote J.-M. et Monteil G., "Influence of the physicochemical, mechanical and morphological fingerpad’s properties on the frictional distinction of sticky/slippery surfaces" - Journal of the Royal Society Interface, vol.12, n°110, p.20150495 (11 pages), 2015, 10.1098/rsif.2015.0495.
111.    DECRETTE M., MOURAD S., OSSELIN J.-F. et DREAN J.-Y., "Jacquard Unival 100 parameters study for high density weaving optimization" - Journal of Industrial Textiles, vol.45, n°6, p.1603-1618, 2015, DOI : 10.1177/1528083714567241.
112.    DJILANI C., ZAGHDOUDI R., DJAZI F., BOUCHEKIMA B., LALLAM A., MODARRESSI A. et ROGALSKI M., "Adsorption of dyes on activated carbon prepared from apricot stones and commercial activated carbon" - Journal of the Taiwan Institute of Chemical Engineers, vol.53, p.112-121, 2015, DOI: 10.1016/j.jtice.2015.02.025.
113.    Frackiewicz-Kaczmarek J., Psikuta A., Bueno M. A. et Rossi R. M., "Effect of garment properties on air gap thickness and the contact area distribution" - Textile Research Journal, vol.85, n°18, p.1907-1918, 2015, DOI: 0.1177/0040517514559582.
114.    Frackiewicz-Kaczmarek J., Psikuta A., Bueno M.-A. et Rossi R. M., "Air gap thickness and contact area in undershirts with various moisture contents: influence of garment fit, fabric structure and fiber composition" - Textile Research Journal, vol.85, n°20, p.2196-2207, 2015, DOI: 0.1177/0040517514551458.
115.    GAZZAH M., JAOUCHI B., SCHACHER L., ADOLPHE D. et SAKLI F., "Study of the influential inputs on the bagged denim fabric behaviors using the principal component analysis method" - International Journal of Clothing Science and Technology, vol.27, n°6, p.922-939, 2015, DOI: 10.1108/IJCST.10.2014.0123.
116.    Guignier C., Bueno M.-A., Camillieri B., Tourlonias M. et Durand B., "Tribological behaviour and wear of carbon nanotubes grafted on carbon fibres" - Composites Part A, vol.71, p.168-175, 2015, 10.1016/j.compositesa.2015.01.013.
117.    KHOFFI F. et HEIM F., "Mechanical degradation of biological heart valve tissue induced by low diameter crimping : an early assessment" - Journal of the Mechanical Behavior of Biomedical Materials, vol.44, p.71-75, 2015.
118.    LUCEREAU B., KHOFFI F., GEORG Y., LEJAY A., HEIM F. et THAVEAU F., "Evaluation of the compliance of prostheses in a pulsated flow" - Annals of Vascular Surgery, vol.26, n°6, p.1059, 2015, DOI:10.1016/j.avsg.2015.06.037.
119.    LUCEREAU B., KHOFFI F., GEORG Y., LEJAY A., HEIM F., THAVEAU F., DURAND B. et CHAKFE N., "Relation between tensile tests and compliance in polyester textile vascular prostheses" - Annals of Vascular Surgery, vol.29, n°6, p.1300-1306, 2015, DOI: 10;1016/j.avg.2015.02.2014.
120.    Mert E., Psikuta A., Bueno M.-A. et Rossi R. M., "Effect of heterogenous and homogenous air gaps on dry heat loss through the garment" - International Journal of Biometeorology, vol.59, n°11, p.1701-1710, 2015, 10.1007/s00484-015-0978-x.
121.    MESSADIA L., EL MOUDEN O. I. E., ANEJJAR A., MESSALI M., SALGHI R., BENALI O., HAMMOUTI B., CHERKAOUI O. et LALLAM A., "Adsorption and corrosion inhibition of new synthesized Pyridazinium-Based Ionic Liquid on Carbon Steel in 0.5 M H2S04" - Journal of Materials and Environmental Science, vol.6, n°2, p.598-606, 2015.
122.    MESSAOUD M., VAESKEN A., ANEJA A., SCHACHER L., ADOLPHE D. C., SCHAFFHAUSER J. et STREHLE P., "Physical and mechanical characterization of recyclable insole product based on new 3D textile structure developed by the use of a patented vertical-lapping process" - Journal of Industrial Textiles, vol.44, n°4, p.497-512, 2015.
123.    MSAHLI S., JAOUADI M., SAKLI F. et DREAN J.-Y., "Study of the Mechanical Properties of Fibers Extracted from Tunisian Agave Americana L." - Journal of Natural Fibers, vol.12, n°6, p.552-560, 2015, DOI: 10.1080/15440478.2014.984046.
124.    NAZIR A., KHENOUSSI N., SCHACHER L., HUSSAIN T., ADOLPHE D. et HEKMATI A. H., "Using the Taguchi method to investigate the effect of different parameters on mean diameter and variation in PA6-6 nanofibres produced by needleless electrospinning" - Royal Society of Chemistry Advances, vol.5, p.76892-76897, 2015.
125.    OULANTI H., LAURENT F., LE HUU T., DURAND B. et DONNET J.-B., "Growth of carbon nanotubes on carbon fibers using the combustion flame oxy-acetylene method" - Carbon, vol.95, p.261-267, 2015, DOI:10;2016/carbon.2015.08.041.
126.    PINOT Y., PAC M.-J., HENRY P., ODARCHENKO Y. I., IVANOV D., ROUSSELOT C., ULHAQ-BOUILLET C., ERSEN O. et TUILIER M.-H., "Friction behaviour of TiAIN films around cubic/hexagonal transition : a 2D grazing incidence X-ray diffraction and electron energy loss spectroscopy study" - Thin Solid Films, vol.577, p.74-81, 2015, DOI: 10.1016/j.tsf.2015.01.044.
127.    PINOT Y., TUILIER M.-H., PAC M.-J., ROUSSELOT C. et THIAUDIERE D., "The competitive growth of cubic domains in Ti1-xAlxN films studied by diffraction anamalous near-edge structure spectroscopy" - Journal of Synchrotron Radiation, vol.22, n°6, p.1440-1449, 2015, DOI: 10.1107/S160057751501632X.
128.    Psikuta A., frackiewicz-Kaczmarek J., Mert E., Bueno M.-A. et Rossi R. M., "Validation of a novel 3D scanning method for determination of the air gap in clothing" - Measurement, vol.67, p.61-70, 2015, 10.1016/j.measurement.2015.02.024.
129.    REINERS P., KYOSEV Y., SCHACHER L. et ADOLPHE D., "Experimental investigation of the influence of wool structures on the stab resistance of woven body armor" - Textile Research Journal, vol.On-line, p.1-11, 2015, DOI : 10.1177/0040517515596934.
130.    SABBATIER G., LARRANAGA A., GUAY-BEGIN A., FERNANDEZ J., DIEVAL F., DURAND B., SARASUA G. et LAROCHE G., "Design, degradation mechanism and long-term cytotoxicity of poly(L-lactide) and poly(lactide-co-E-caprolactone) terpolymer film and airspun nanofiber scaffold" - Macromolecular Bioscience, vol.15, n°10, p.1392-1410, 2015, DOI : 10/1002/mabi.201500130.
131.    TORRES-SILVA R., BRANDAO L.-M., BJORDAL J., FRIGO L., RAHOUADJ R., ARNOLD G., PINTO LEAL-Junior E., MAGDALOU J., PALLOTA R. et LABAT M. R., "The Low Level Laser Therapy (LLLT) Operating in 660 Nm Reduce Gene Expression of Inflammatory Mediators in the Experimental Model of Collagenase-Induced Rat Tendinitis" - Lasers in Medical Science, vol.30, n°7, p.1985-1990, 2015, doi.org/10.1007/s10103-014-1676-3.
132.    Tourlonias M., Bueno M.-A., Bocquet R., Rossi R. et Derler S., "Study of the friction mechanisms of pile surfaces: measurement conditions and pile surface properties" - Wear, vol.328-329, p.100-109, 2015, 10.1016/j.wear.2015.01.039.
133.    TRAN T. A. D., ARNOLD M., SCHACHER L., ADOLPHE D. et REYS G., "Development of personal protective equipment for medical staff : case of dental surgeon" - AUTEX Research Journal, vol.15, n°4, p.280-297, 2015, DOI : 10.1515/aut-2015-0002.
134.    VAESKEN A., KHOFFI F., HEIM F., DIEVAL F. et CHAKFE N., "Fibre Heart Valve prothesis : Early in vitro fatigue results" - Journal of Biomedical Materials Research: Part B Applied Biomaterials, vol.104, n°5, p.986-992, 2015, DOI 10.1002/jbm.b.33393.
135.    Vezzoli E., Ben Messaoud W., Amberg M., Lemaire-Semail B., Giraud F. et Bueno M.-A., "Physical and perceptual independence of ultrasonic vibration and electrovibration for friction modulation" - IEEE Transactions on Haptics, vol.8, n°2, p.235-239, 2015, 10.1109/TOH.2015.2430353.
136.    AFZAL M. A., DREAN J.-Y., HARZALLAH O., KHENOUSSI N., AHMAD S. et AKHTAR N.-A., "Development of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications " - Textile Research Journal, vol. , p.14 pages, 2016, DOI:10.1177/0040517516663144.
137.    BARK D., KOUPEI A., FORLEO M., VAESKEN A., HEIM F. et DASI L., "Reynold Shear Stress for Textile Prosthetic Heart Valves in Relation to Fabric Design" - Journal of the Mechanical Behavior of Biomedical Materials, vol.60, p.280-287, 2016, doi:10.1016/j.jmbbm.2016.01.016.
138.    BEN AZOUZ K., BEKKOUR K. et DUPUIS D., "Influence of the temperature on the rheological properties of bentonite suspensions in aqueous polymer solutions" - Applied Clay Science vol.123, p.92-98, 2016, DOI: 10.1016/j.clay.2016.01.016.
139.    Ben Messaoud W., Bueno M.-A. et Lemaire-Semail B., "Relation between human perceived friction and finger friction characteristics" - Tribology International, vol.98, p.261-269, 2016, DOI:10.1016/j.triboint.2016.02.031.
140.    Ben Messaoud W., Lemaire-Semail B., Amberg M. et Bueno M.-A., "Amplitude control of an ultrasonic vibration for a tactile stimulator" - IEEE/ASME Transactions on Mechatronics, vol.21, n°3, p.1692–1701, 2016.
141.    Guignier C., Bueno M.-A., Camillieri B., Le Huu T., OuIanti H. et Durand B., "Tribological behaviour and adhesion of carbon nanotubes grafted on carbon fibres" - Tribology International, vol.100, p.104-115, 2016, DOI:10.1016/j.triboint.2015.12.007.
142.    HAMDI B., GOTTSCHALK-GAUDIG T., BALARD H., BRENDLE E., NEDJARI N. et DONNET J.-B., "Aging process of some pyrogenic silica samples exposed to controlled relative humidities : Part 1 - Kinetic of water sorption and evolution of the surface silanol density" - Colloids and Surfaces A : Physichochemical and Engineering Aspects, vol.491, p.62–69, 2016, DOI: 10.1016/j.colsurfa.2015.10.018.
143.    Marot L., De Temmerman G., van den Berg M. A., Renault P.-O., Covarel G., Joanny M., Travère J. M., Steiner R., Mathys D. et Meyer E., "ITER first mirror mock-ups exposed in Magnum-PSI" - Nuclear Fusion, vol.56, n°6, 2016, DOI: 10.1088/0029-5515/56/6/066015.
144.    Tourlonias M. et Bueno M.-A., "Experimental simulation of friction and wear of carbon yarns during the weaving process" - Composites Part A, vol.80, p.228-236, 2016, 10.1016/j.compositesa.2015.07.024.
145.    WANKO A., LAURENT J., BOIS P., WAGNER-KOCHER C., BAHLOULI N., BRAUN B. et PIETER-WILLEM PROVO k., "Assessment of rock wool as support material for on site sanitation : hydrodynamic and mechanical characterization" - Environmental Technology, vol.37, n°3, p.369-380, 2016, 10.1080/09593330.2015.1069901.
146.    YOSOUF K., LATROCH H., SCHACHER L., ADOLPHE D., DREAN E. et ZIMPFER V., "Frictional sound analysis by simulating the human arm movement" - AUTEX Research Journal, vol.On-line, p.1-8, 2016, DOI: 10.1515/aut-2015-0033.
147.    Mert E., Böhnisch S., Psikuta A., Bueno M.-A. et Rossi R. M., "Contribution of garment fit and style to thermal comfort at lower body" - International Journal of Biometeorology, Accepted 2016 January 23rd.

Ouvrages

1.    Lamy B. et Bueno M.-A., "Tribologie. Caractérisation des surfaces. Surfaces industrielles classiques, surfaces textiles, tissus biologiques", Ellipses, Technosup, Paris, 978-2-7298-6494-1, 2011.
2.    EL OUDIANI A., MSAHLI S., JAOUADI M., CHAABOUNI Y., SAKLI F., HARZALLAH O. et DREAN J., "Les fibres d'Agave Americana L. Résultats de vingt ans de recherche expérimentale", Edilivre Editions,  ISBN : 9782334094009, 2016.

Chapitres d’ouvrages

1.    BUENO M.-A., "Tribologie des textiles" in Techniques de l'Ingénieur,  vol.TRI 4400, p.1-18, 2011.
2.    CHAKFE N., KHOFFI F., GEORG Y., THAVEAU F., DIEVAL F., LE MAGNEN J.-F. et DURAND B., "Do we need a compliant graft in the leg ?" in Controverse and updates in vascular surgery, Edizioni Minverva Medica, BEQUEMIN Jean-Pierre, Turin, vol.79, p.466-472, ISBN-13 978-88-7711-701-4, 2011.
3.    HARZALLAH O. et DREAN J.-Y., "Macro and Micro Characterization of Biopolymers: Case of Cotton Fibre" in Biotechnology of Polymers, InTech,  vol.10, p.193-218, ISBN 978-953-307-179-4, 2011.
4.    HEIM F., CHAKFE N. et DURAND B., "Biotextiles as Percutaneous Heart Valves" in Biotextiles as Medical Implants, Woodhead publishing, King M Gupta B, 2011.
5.    NJEUGNA N., SCHACHER L., ADOLPHE D. C., SCHAFHAUSER J.-B. et STREHLE P., "Development of a New 3D Nonwoven for Automotive Trim Applications" in New Trends and Developments in Automotive Industry, Chiaberge Marcello, p.323-346, ISBN 978 953 307 999-8, 2011.
6.    SCHACHER L., BENSAID S., SELSABIL EL-GHEZAL J. et ADOLPHE D. C., "Sensory and Physiological Issue" in Woven Fabrics, Intech Open Access,  p.153-178, ISBN 978-953-307-1452-7, 2011.
7.    TOURLONIAS M., BUENO M.-A. et BIGUÉ L., "Chapter 11: "Optoelectronic techniques for surface characterization of fabrics"" in Optoelectronics Materials and Techniques, InTech,  p.287-312, 978-953-307-276-0, 2011.
8.    ANEJA A., MILITKY J., SCHACHER L., ADOLPHE D. et JACOB K., "Structure Properties Relationship of Goose Down for Thermal Insulation" in Selected properties of functional materials,  p.179-191, ISBN 978-80-87269-29-9, 2013.
9.    COVAREL G., BODDAERT X., BENSAID B., MATTEI M., BENABEN P. et BOIS J., "Chap 9: Extracting adhesion properties of organic thin films on compliant substrates using scratch test technique" in Advances in Engineering Research, Nova,  vol.7, p.245-255, ISBN 978-1-62618-983-6, 2013.
10.    SABBATIER G., LEVESQUE L., LEROY M., MONTANO V., CLOUTIER M. et LOY C., "Advanced materials for biomedical applications" in Functional Materials,  227-231, 2014.
11.    Bueno M.-A., "Tribologie des textiles : Frottement, usure et propriétés mécaniques" in Techniques de l'Ingénieur,  TRI 4400, p.1-24, 2015.
12.    Bueno M.-A., Camillieri B. et Tourlonias M., "Matériaux et tribologie - Actes des JIFT 2014", Presses des Mines,  ISBN: 978-2-35671-234-9, 2015.
13.    DREAN J.-Y. et HARZALLAH O., "Variance analysis and autocorrelation function for 2D fibre lap statistical analysis" in Non woven Fabrics, Intech,  ISBN 978-953-51-4586-8, 2015.
14.    NAZIR A., KHENOUSSI N., HEKMATI A. H., SCHACHER L. et ADOLPHE D., "Recent Developments of Electrospinning for Biosensors and Biocatalysis" in Electrospinning for Advanced Energy and Environmental Applications, Cavaliere Sara, vol.DOI : 10.1201/b18838-9, p.201-218, ISBN: 978-1-4822-1767-4, 2015


Réalisé avec le CMS Plone, le système de gestion de contenu Open Source

Ce site respecte les normes suivantes :